HKN TEXTILE MACHINES

TRADE  I  SALE  I  SECOND HAND

Home  I   AGB   I   Imprint

W668 cabinet hank dyeing machine : Strang-Färbeapparat

Then, year 1970

Specification:

Then, year 1970, low pressure type suitable until 105°C, length 2600, width 1250 mm, high

1850 mm for 100-150 kg hanks, with 2 hank carriers

W788 centrifuge : Zentrifuge

Krantz, serial-no. 2608435, year 1989, type Randlos,

Specification:

Speed max. 580 m/min., dia. 1.480 mm x 1200 mm high,

Volume 1750 l, 360 kg dry material (yarn, bumps, tops, cones,

Loose fibres, fabrics), wet material max. 1100 kg, pneumatic lift

Of head lid and inside lid, electronic control

W648 centrifuge : Zentrifuge

Krantz, year 1993

Specification:

Krantz, year 1993, type Randlos, speed max 960 m/min, Ø 1600 x 1200 mm high, volume 2050 l, 400

Kg dry material (yarn, bumps, tops, cones, loose fibres, fabrics) wet material max. 1200 kg, with

Insert/carrier for bumps and cones, pneumatic lift of head lid and inside lid, electronic control.

Machine has run only short time, very good condition

A071 chemical proportioning device for 1 liquid with metering pump : Chemikalien-Dosieranlage

Fabr. Chem Tec, year 1990

Specification:

Fabr. Chem Tec, year 1990

A072 bchemical proportioning device for 2 liquids with metering pump : Chemikalien-Dosieranlage

Fabr. Chem Tec, year 1990

Specification:

Fabr. Chem Tec, year 1990

A073 chemical proportioning device for 9 liquids with metering pump : Chemikalien-Dosieranlage

Fabr. Chem Tec, year 1990

Specification:

Fabr. Chem Tec, year 1990

W474 forming machines for cones (rounding of edges) : Spulen-Abkant-Maschine

Tremöhlen, year 1968, type KAM, 2 conveyor

Specification:

Tremöhlen, year 1968, type KAM, 2 conveyor

W747 Hank-cabinet dyeing machine : Strang-Färbeapparat

Fabr. Hirche, Germany, same principle as Obermaier and Krantz, ca. 1965,

Specification:

Fabr. Hirche, Germany, same principle as Obermaier and Krantz, ca. 1965,

Atmospheric system, for 8-15 kg, 1 carrier for hanks, with temperature control,

Electric control box ca. 2002,

Still in working position

S2104b+c hank dyeing machines Bellini, year 1986, for 200 kg : Strang-Färbeapparat

low pressure type, 0,4 bar

Specification:

low pressure type, 0,4 bar, temperature until 110°C, 2.720 l,

separate second vessel and mixer, automatic temperature control,

each 1 carrier for hanks with dimension inside: Width 100/105 cm x length 100 cm x high 150 cm,

sticks have net length of 1.000 mm and at the end a width of 50 mm.

Dependent of the volume of hanks maximum 20 sticks (20x50 = 1000 mm) can be arranged in 1 row.

W791 heating cabinet : Wärme-Schrank

VEB-Dental, for temperatures until 240°C, electr. Heating,

Specification:

VEB-Dental, for temperatures until 240°C, electr. Heating,

1250 W, 220 V, thermostat,

Dimensions outside: 40 x 48 x 52 cm, inside: 31 x 35 x 35 cm

W199 Heating-board : Wärme-Schrank

Muvek, until 300°C

Specification:

Muvek, until 300°C, like new, electr. Heating 380 V, 4,4 kW, size of heating box inside: width

1.200 mm, deap 500 mm, high 720 mm

S1998 High Temperature Cone Dyeing Machines : Färbe-Apparat

Scholl, type Tempo LA, machine No. 96145, Y.O.M. 1996/2000,

Specification:

Scholl, type Tempo LA, machine No. 96145, Y.O.M. 1996/2000,

Capacity 778 ltrs., up to 140°C, 4,4 atm., inverter,

With 1:1 feed tank with mixer, feed tank for dyestuff,

With level adjustment for smaller output, control Barco Sedo Sedomat 2000,

Boiler dimensions: dia. 75 cm, height 240 cm, 2 double carrier approx. 100 kgs

S2001 High Temperature Cone Dyeing Machines : Färbe-Apparat

Scholl, type Tempo LA, machine No. 97269, Y.O.M. 1998/2000,

Specification:

Scholl, type Tempo LA, machine No. 97269, Y.O.M. 1998/2000,

Capacity 778 ltrs., up to 140°C, 4,4 atm., inverter,

With 1:1 feed tank with mixer, feed tank for dyestuff,

With level adjustment for smaller output, control Barco Sedo Sedomat 2000,

Boiler dimensions: dia. 75 cm, height 240 cm, 3 double carrier approx. 100 kgs.

W787 hopper feeder : Nass-Kastenspeiser

Fleissner, for wet material, ww 1200 mm, with V4A needle lattic, for feeding dryer

Specification:

Fleissner, for wet material, ww 1200 mm, with V4A needle lattic, for feeding dryer

R010-11 HT-Radial-dyeing machine : Färbeapparat

Krantz, year 1959/1957

Specification:

Krantz, year 1959/1957, 4 bar, Ø 1 m, 1.250 ltr., 2 carrier for 160 kg tops, 1 carrier for 160 kg cones,

General overhoult in 1991/1996 with new valves automatic micro processor control Fabr. Then

Datacomp DCEB, program card control

R007-8 HT-Radial-dyeing machines : Färbeapparat

Callebaut de Blicquy, year 1963

Specification:

Callebaut de Blicquy, year 1963, type H10, 4 bar, 1.760 ltr, Ø 1 m, each 2 carrier for each 180 kg tops,

R007 has additional 1 carrier for 100-180 kg cones, temperature control

R012-13 HT-Radial-dyeing machines : Färbeapparat

Callebaut de Blicquy, year 1963

Specification:

Callebaut de Blicquy, year 1963, type H6, 4 bar, 590 ltr, 2 carrier for 60 kg tops, generaloverhault in

1988/1996, with valves and automatic micro processor control Fabr. Then Datacomp DCEB, program

Tape system.

R013 additional with 2 carrier for cones ca. 75 kg, year 1996

V076 hydraulic bumpspress : Bumps-Presse

Fabr. Vlnena, year ca. 1985

Specification:

Fabr. Vlnena, year ca. 1985, for pressing bumps in 1 step in 8 dyeing cylinders

R009 hydraulic bumpspress for pressing bumps in dyecylinder Ø 400 mm : Bumps-Presse

Autefa, year 1973, type 231-19, ca. 6 to., 5,5 kW

Specification:

Autefa, year 1973, type 231-19, ca. 6 to., 5,5 kW

R004 hydraulic bumpspress for pressing bumps in dyecylinder Ø 400 mm : Bumps-Presse

Autefa, year 1973, type 231-21, ca. 10 to., 5,5 kW

Specification:

Autefa, year 1973, type 231-21, ca. 10 to., 5,5 kW

R054 bhydraulic bumpspress for pressing bumps in dyecylinder Ø 400 mm : Bumps-Presse

Autefa, year 1981, type 232-17, ca. 13 to., 7,5 kW

Specification:

Autefa, year 1981, type 232-17, ca. 13 to., 7,5 kW

A070 Lab-dryeing-device : Labor-Trockner

V4a, for hanks

Specification:

V4a, for hanks

W676 Lab-dyeing machine : Labor-Färbeapparat

Hanau, year ca. 1980

Specification:

Hanau, year ca. 1980, type Linitest, for 8 dyeing bombs (small boxes V4A) for samples 5-50 gr,

Temperature until 150°C, electric heating

W750 Laboratory dyeing machine : Labor-Färbeapparat

Ahiba, year 1971

Specification:

Ahiba, year 1971, 12 positions with glass panels for the following beaker sizes:

12 Pyrexglass beakers 100, 200, 400 or 600 cc

12 Autoclave pressure beakers 100, 200 or 400 cc

6 Pyrexglass beakers 1000 cc, 3 Pyresglass beakers 1500, 2000 or 3000 cc,

Temperature range: 20-140°C, heating power: 4400 Watts

W751 Laboratory dyeing machine : Labor-Färbeapparat

Ahiba, year 1975

Specification:

Ahiba, year 1975, 12 positions for the following beaker sizes:

12 Pyrexglass beakers 200, 400 or 800 cc,

4 Pyrexglass beakers 2000, 3000 or 4000 cc,

Temeperature range: 20-140°C, heating power: 4400 Watts

W494 Laboratory shaker

Fabr. Gesellschaft für Labortechnik

Specification:

Fabr. Gesellschaft für Labortechnik, type GFL3005 for 12 glascups, shakefrequence 190 m/min

 

W259 measure out device for chemicals (acid and leach) : Chemikalien-Dosieranlage

Like position W152, with tanks, meter-cylinder-stations and pumps

Specification:

Like position W152, with tanks, meter-cylinder-stations and pumps

W152 measure out device for chemicals (acid and leach) : Dosier-Anlage

With 5 polyethylen-tanks

Specification:

With 5 polyethylen-tanks with level control and scale for content, 250 ltr., 4 meter-cylinders 25 ltr.,

1 meter cylinder 50 ltr., electric control, pipes and valves

R090 Multicolor-LAB-dyeing machines : Labor-Färbeapparat

Pretema, year 1972

Specification:

Pretema, year 1972, 6 dye-position 5 bar, 60mm Ø, high=200mm,

Temperature until 140°C, separate dyeing condition for each dyeing spindle

M068 pallets : Aushebeplatten

Stainless steel V4A, for stock dying in packing cylinders,

Specification:

Stainless steel V4A, for stock dying in packing cylinders,

Diameter 1.220 / 510 x 5 mm with 4 chains

W142 plate heat exchanger : Wärmetauscher

Alfa Laval, year 1980

Specification:

Alfa Laval, year 1980, Nirosta-steel V4A no. 4571, 6/8 bar, 2 ½'', capacity 40 cbm/h, 80°C,

Condition like new

T077 Press for Biko cones : Spulen-Presse

Krantz, year 1987

Specification:

pneumatic press for pressing Biko cones to carriers before dyeing

M075 pressure tank : Druck-Kessel

For water, 6.000 ltr., 6 bar, on feet, year 1979

Specification:

For water, 6.000 ltr., 6 bar, on feet, year 1979

M030 Soxlet-device for finding the residual fat with 6 destilation-devices

.

Specification:

.

W786 stamp press : Stampfpresse

Autefa, type 6 76, serial-no. 6394, year 1980

Specification:

Autefa, type 6 76, serial-no. 6394, year 1980, for pressing/stamping loose fibres in dye-cylinder,

High until 1.500 mm, diameter until 1.600 mm

HKN-Machines

Hattorfer Kammgarnspinnereien GmbH - Niederschmalkalden

Postfach 1161

D-49414 Wagenfeld / GERMANY

 

Tel. + 49 (0) 5444 501 47

Fax + 49 (0) 5444 800

 

E-Mail

Wagenfelder

Spinnereien GmbH

 

Maschweg 1 - 7

D-49419 Wagenfeld / Germany

 

Tel. + 49 (0) 5444 501-0

Fax + 49 (0) 5444 501-49

 

E-Mail

HKN-Machines

Hattorfer Kammgarnspinnereien GmbH - Niederschmalkalden

 

gegründet: 1832/1900 ein Unternehmen der Spinnereigruppe Wagenfeld seit 1988

Imprint    I    AGB    I    Wagenfelder.com